This series gives you the opportunity to build a full console, or a 4 unit rackmount (Pre Eq Limiter)
Specifications • High level input, input at enuation pad, phantom power and phase reverse. • FET Limiter with 2.5dB ratio and threshold range variable from -10dB to maximum signal level. • Equaliser, HF at 2 frequencies, Variable frequency Mid,ranges 25Hz to 1K6 and 250Hz to 16KHz, bass at 2 frequencies. EQ in/out switch. • Lundahl input 1527 transformers • Channel mute switch.
RM4 Master Section Specifications • Headphone Level and Jack • Monitor Section with Monitor Dim-Mono-Mute Buttons • Master Stereo Output Fader • 1 kHz osciliator with throught panel pre-set adjustment. • Aux, Master, Cue Master and AFL listening control • A stereo return input • Talk Back but on with microphone • 5 Monitor points are provided. • Monitor Mono - Cut and Solo - And Master monitor pot with dim
Rm4 Return specifications • loudspeakers • output 1 is pre set on site to match the main monitor system. • ls 1 and 2 are then used preset the secondary loudspeakers • 5 monitor points are provided. ST 1 and ST 2 inputs may be connected directly to the stereo o/ps or taken to a patch bay to monitor across recording mediums. • the sources may be mixed into the monitor circuits. • SOLO SAFE sets the channel modules to AFL instead of channel Mute switching off all other channels. Master monitor level and DIM winch is usally set to16dB.
Options: • Optional Master Section available in the 4U Bucket
Available in: 2U: Mono • Stereo • Quad : Mounted in a double rackspace. Internal PSU 4U: Available in a bucket with anywhere form 8 to 16 Units. External PSU
